|
|
|
|
|
|
|
|
|
|
|
|
|
|
DAEWOO PUMA 12LC HORIZONTAL LATHE
No Longer in production.
About this page
This is the DAEWOO PUMA 12LC horizontal turning machine information page.
Here you will find information about this turning machine, links to the machine tool builder, dealers / agents and also where our search engine has found DAEWOO PUMA 12LC horizontal lathes available for sale now.
This machine is not in production anymore therefore only available used / second hand.
You will also find on this page links to other DAEWOO turning machines that are available for sale and other DAEWOO machine information pages.
Here you will find information about this turning machine, links to the machine tool builder, dealers / agents and also where our search engine has found DAEWOO PUMA 12LC horizontal lathes available for sale now.
This machine is not in production anymore therefore only available used / second hand.
You will also find on this page links to other DAEWOO turning machines that are available for sale and other DAEWOO machine information pages.
DAEWOO PUMA 12LC Basic Spec
Machine Type :
horizontal
Control :
Number of Axes :
2
Cutting Diameter :
480 mm
Cutting Length :
1020 mm
Bar / Bore :
117 mm
Tool Stations :
0
Spindles :
1
Motor Power :
26 kw
Spindle Speed :
2000 rpm
Extra Functions :
None
DAEWOO Machine Tool Builder
Doosan Infracore
DAEWOO Machine Tool Dealers
Send Page To A Friend Form
Your Name * :
Your Email Address * :
To Email Address * :
Your message to the recipient :
Similar Premium Machines
|
Year : 2007 Equipped With Chip Conveyor 18" Hydraulic Thru Hole Chuck Programmable Tailstock Boxed Ways All Available Tooling All Available Ma ... |
|
Year : 1995 Equipped With 8" 3 Jaw Hydraulic Chuck Chip Conveyor Tailstock (#4 Morse Taper) RS-232 Port Fanuc 15M Control Loads of Tooling (Bo ... |
|
Year : 2004 Equipped With Chip Conveyor All Available Manuals & Tool Block Holders Standard Coolant System W/ Tank and Pump Programmable Tailsto ... |
|
Year : 1988 Equipped With 6" 3 Jaw Hydraulic Chuck Tailstock w/ Program. Quill Parts Catcher Chip Conveyor Miscellaneous Tooling All Available ... |
|
Year : 2007 Equipped With Inverted Spindle Design Automatic Tool Presetter Complete Coolant System Full Set of Tooling All Available Manuals F ... |
|
Year : 2006 Equipped With Inverted Spindle Design Automatic Tool Presetter Complete Coolant System Full Set of Tooling All Available Manuals ... |
|
Year : 1997 Equipped With Fanuc OTT-C CNC Control (2) 8" Chucks (2) 8 Station Turrets Coolant Chip Conveyor Foot Pedals All Available Tooling ... |
|
Year : 2004 Equipped With Dual Spindle Design Dual Turret Design Y Axis Capability Full C Axis on Both Spindles Live Tooling Tool Monitoring ... |
|
Year : 2004 Equipped With Dual Spindle Design Dual Turret Design Y Axis Capability Full C Axis on Both Spindles Live Tooling Tool Monitoring ... |
|
Year : 1995 Equipped With 12" Hydraulic Chuck Chip Conveyor 2 Speed Geared Head Lots of Tooling Programmable Tailstock Flood Coolant All Avai ... |
Reg Office: Giantswood House, Hulme Walfield, Congleton, Cheshire, CW12 2JJ, England. Phone Number +44 1260 272172 Fax Number +44 1260 298644 Reg number : 3030191
© findamachine.com 2004 - 2008 All Rights Reserved.
© findamachine.com 2004 - 2008 All Rights Reserved.