|
|
|
|
|
|
|
|
|
|
|
|
|
|
DAEWOO PUMA 12S HORIZONTAL LATHE
About this page
This is the DAEWOO PUMA 12S horizontal turning machine information page.
Here you will find information about this turning machine, links to the machine tool builder, dealers / agents and also where our search engine has found DAEWOO PUMA 12S horizontal lathes available for sale now.
The DAEWOO PUMA 12S horizontal lathe is currently available built to order from Doosan Infracore in Republic of Korea.
You will also find on this page links to other DAEWOO turning machines that are available for sale and other DAEWOO machine information pages.
Here you will find information about this turning machine, links to the machine tool builder, dealers / agents and also where our search engine has found DAEWOO PUMA 12S horizontal lathes available for sale now.
The DAEWOO PUMA 12S horizontal lathe is currently available built to order from Doosan Infracore in Republic of Korea.
You will also find on this page links to other DAEWOO turning machines that are available for sale and other DAEWOO machine information pages.
DAEWOO PUMA 12S Basic Spec
Machine Type :
horizontal
Control :
Fanuc
Number of Axes :
1 to 3
Cutting Diameter :
430 mm
Cutting Length :
800 mm
Bar / Bore :
76 mm
Tool Stations :
12
Spindles :
1
Motor Power :
22 kw
Spindle Speed :
3000 rpm
Extra Functions :
Mill Drill
DAEWOO Machine Tool Builder
Doosan Infracore
DAEWOO Machine Tool Dealers
Send Page To A Friend Form
Your Name * :
Your Email Address * :
To Email Address * :
Your message to the recipient :
Similar Premium Machines
|
Year : 2004 Equipped With Dual Spindle Design Dual Turret Design Y Axis Capability Full C Axis on Both Spindles Live Tooling Tool Monitoring ... |
|
Year : 2007 Equipped With Inverted Spindle Design Automatic Tool Presetter Complete Coolant System Full Set of Tooling All Available Manuals F ... |
|
Year : 1995 Equipped With 8" 3 Jaw Hydraulic Chuck Chip Conveyor Tailstock (#4 Morse Taper) RS-232 Port Fanuc 15M Control Loads of Tooling (Bo ... |
|
Year : 2005 Equipped With Dual Spindle Design Dual Turret Design Y Axis Capability Full C Axis on Both Spindles Live Tooling Tool Monitoring ... |
|
Year : 1997 Equipped With Fanuc OTT-C CNC Control (2) 8" Chucks (2) 8 Station Turrets Coolant Chip Conveyor Foot Pedals All Available Tooling ... |
|
Year : 1997 Equipped With Tool Presetter Chip Conveyor 2.9" Bar Capacity All Available Manuals Programmable Tailstock 45 Deg Slant Bed Design ... |
|
Year : 1995 Equipped With 12" Hydraulic Chuck Chip Conveyor 2 Speed Geared Head Lots of Tooling Programmable Tailstock Flood Coolant All Avai ... |
|
Year : 2004 Equipped With Chip Conveyor All Available Manuals & Tool Block Holders Standard Coolant System W/ Tank and Pump Programmable Tailsto ... |
|
Year : 2006 Equipped With Hydraulic Actuator (commonly equipped with 15" chuck) Complete Set of Toolholders Never Used in Production Hardened Gr ... |
|
Year : 2006 Equipped With Inverted Spindle Design Automatic Tool Presetter Complete Coolant System Full Set of Tooling All Available Manuals ... |
Reg Office: Giantswood House, Hulme Walfield, Congleton, Cheshire, CW12 2JJ, England. Phone Number +44 1260 272172 Fax Number +44 1260 298644 Reg number : 3030191
© findamachine.com 2004 - 2008 All Rights Reserved.
© findamachine.com 2004 - 2008 All Rights Reserved.