|
|
|
|
|
|
|
|
|
|
|
|
|
|
DAEWOO PUMA 200 SC HORIZONTAL LATHE
No Longer in production.
About this page
This is the DAEWOO PUMA 200 SC horizontal turning machine information page.
Here you will find information about this turning machine, links to the machine tool builder, dealers / agents and also where our search engine has found DAEWOO PUMA 200 SC horizontal lathes available for sale now.
This machine is not in production anymore therefore only available used / second hand.
You will also find on this page links to other DAEWOO turning machines that are available for sale and other DAEWOO machine information pages.
Here you will find information about this turning machine, links to the machine tool builder, dealers / agents and also where our search engine has found DAEWOO PUMA 200 SC horizontal lathes available for sale now.
This machine is not in production anymore therefore only available used / second hand.
You will also find on this page links to other DAEWOO turning machines that are available for sale and other DAEWOO machine information pages.
DAEWOO PUMA 200 SC Basic Spec
Machine Type :
horizontal
Control :
Number of Axes :
2
Cutting Diameter :
340 mm
Cutting Length :
398 mm
Bar / Bore :
63 mm
Tool Stations :
0
Spindles :
2
Motor Power :
15 kw
Spindle Speed :
4500 rpm
Extra Functions :
None
DAEWOO Machine Tool Builder
Doosan Infracore
DAEWOO Machine Tool Dealers
Send Page To A Friend Form
Your Name * :
Your Email Address * :
To Email Address * :
Your message to the recipient :
Similar Premium Machines
|
Year : 2007 Equipped With Inverted Spindle Design Automatic Tool Presetter Complete Coolant System Full Set of Tooling All Available Manuals F ... |
|
Year : 1988 Equipped With 6" 3 Jaw Hydraulic Chuck Tailstock w/ Program. Quill Parts Catcher Chip Conveyor Miscellaneous Tooling All Available ... |
|
Year : 1994 Equipped With RS-232 Interface Flood Coolant System Tailstock w/ Hydraulic Quill Coolant Guards All Available Tooling All Availabl ... |
|
Year : 2006 Equipped With RS-232C Port For DNC Interface 10" 3 Jaw Hydraulic Chuck Bracket for Steady Rest Schunk THL-3 Self Centering Steady R ... |
|
Year : 2006 Equipped With Hydraulic Actuator (commonly equipped with 15" chuck) Complete Set of Toolholders Never Used in Production Hardened Gr ... |
|
Year : 1996 Equipped With Chip Conveyor Parts Catcher Barfeed Interface 8" Hydraulic Chuck Tailstock All Available Tooling All Available Manu ... |
|
Year : 1999 Equipped With Programmable Tailstock 21" 3 Jaw Hydraulic Chuck Tool Life Monitoring Over 2,000 ft-lbs Torque Chip Conveyor All Ava ... |
|
Year : 1995 Equipped With 8" 3 Jaw Hydraulic Chuck Chip Conveyor Tailstock (#4 Morse Taper) RS-232 Port Fanuc 15M Control Loads of Tooling (Bo ... |
|
Year : 1995 Equipped With 12" Hydraulic Chuck Chip Conveyor 2 Speed Geared Head Lots of Tooling Programmable Tailstock Flood Coolant All Avai ... |
|
Year : 2001 Equipped With Programmable Tailstock Automatic Tool Presetter Parts Catcher Chip Conveyor Barfeed Interface All Available Tooling ... |
Reg Office: Giantswood House, Hulme Walfield, Congleton, Cheshire, CW12 2JJ, England. Phone Number +44 1260 272172 Fax Number +44 1260 298644 Reg number : 3030191
© findamachine.com 2004 - 2008 All Rights Reserved.
© findamachine.com 2004 - 2008 All Rights Reserved.