|
|
|
|
|
|
|
|
|
|
|
|
|
|
DAEWOO PUMA 240MA HORIZONTAL LATHE
About this page
This is the DAEWOO PUMA 240MA horizontal turning machine information page.
Here you will find information about this turning machine, links to the machine tool builder, dealers / agents and also where our search engine has found DAEWOO PUMA 240MA horizontal lathes available for sale now.
The DAEWOO PUMA 240MA horizontal lathe is currently available built to order from Doosan Infracore in Republic of Korea.
You will also find on this page links to other DAEWOO turning machines that are available for sale and other DAEWOO machine information pages.
Here you will find information about this turning machine, links to the machine tool builder, dealers / agents and also where our search engine has found DAEWOO PUMA 240MA horizontal lathes available for sale now.
The DAEWOO PUMA 240MA horizontal lathe is currently available built to order from Doosan Infracore in Republic of Korea.
You will also find on this page links to other DAEWOO turning machines that are available for sale and other DAEWOO machine information pages.
DAEWOO PUMA 240MA Basic Spec
Machine Type :
horizontal
Control :
Fanuc
Number of Axes :
3
Cutting Diameter :
170 to 290 mm
Cutting Length :
391 mm
Bar / Bore :
44 mm
Tool Stations :
12
Spindles :
1
Motor Power :
11.19 to 18.64 kw
Spindle Speed :
6000 rpm
Extra Functions :
Mill Drill
DAEWOO Machine Tool Builder
Doosan Infracore
DAEWOO Machine Tool Dealers
Send Page To A Friend Form
Your Name * :
Your Email Address * :
To Email Address * :
Your message to the recipient :
Similar Premium Machines
|
Year : 2005 Equipped With Dual Spindle Design Dual Turret Design Y Axis Capability Full C Axis on Both Spindles Live Tooling Tool Monitoring ... |
|
Year : 1988 Equipped With 6" 3 Jaw Hydraulic Chuck Tailstock w/ Program. Quill Parts Catcher Chip Conveyor Miscellaneous Tooling All Available ... |
|
Year : 2007 Equipped With Inverted Spindle Design Automatic Tool Presetter Complete Coolant System Full Set of Tooling All Available Manuals F ... |
|
Year : 2006 Equipped With RS-232C Port For DNC Interface 10" 3 Jaw Hydraulic Chuck Bracket for Steady Rest Schunk THL-3 Self Centering Steady R ... |
|
Year : 1994 Equipped With RS-232 Interface Flood Coolant System Tailstock w/ Hydraulic Quill Coolant Guards All Available Tooling All Availabl ... |
|
Year : 1995 Equipped With 8" 3 Jaw Hydraulic Chuck Chip Conveyor Tailstock (#4 Morse Taper) RS-232 Port Fanuc 15M Control Loads of Tooling (Bo ... |
|
Year : 2006 Equipped With Hydraulic Actuator (commonly equipped with 15" chuck) Complete Set of Toolholders Never Used in Production Hardened Gr ... |
|
Year : 2006 Equipped With Chip Conveyor 21" Hydraulic Chuck Full C Axis Live Tooling Steady Rest RS-232C Port for DNC Interface Tailstock Al ... |
|
Year : 2007 Equipped With Chip Conveyor 18" Hydraulic Thru Hole Chuck Programmable Tailstock Boxed Ways All Available Tooling All Available Ma ... |
|
Year : 2001 Equipped With Programmable Tailstock Automatic Tool Presetter Parts Catcher Chip Conveyor Barfeed Interface All Available Tooling ... |
Reg Office: Giantswood House, Hulme Walfield, Congleton, Cheshire, CW12 2JJ, England. Phone Number +44 1260 272172 Fax Number +44 1260 298644 Reg number : 3030191
© findamachine.com 2004 - 2008 All Rights Reserved.
© findamachine.com 2004 - 2008 All Rights Reserved.